BH-H10 Domestic Gas Alarm (CH4+CO)

BH-H10 Domestic Gas Alarm (CH4+CO)

BH-H10 household gas detector is widely used in residences, hotels, apartments and other locations. It uses high-quality gas sensors and advanced electronic technology. The detector warns of methane and carbon monoxide at levels above the alarm set-point. It is your responsibility to respond properly to the audible and visual alarm.


TAG:  BH-H10domestic gas alarmgas alarm for homemethane gas alarm

Introduction

1、Strong anti-interference ability (detection is not affected by oil fumes, water vapor, etc.);
2、Maintenance free; Accurate measurement, high sensitivity, and fast response;
3、Support 4G networking;
4、Supports 12V active output and can drive solenoid valves
5、Support a set of passive relay outputs.


TAG:  BH-H10domestic gas alarmgas alarm for homemethane gas alarm

Specifications

Gas Monitored:CH4+CO
Sensor Life:2 years(under normal use)
Measurement Range:CH4:0-20%LEL   CO:0-1000PPM
Power Supply:AC 90V-264V
Sensor type:CH4:Semiconductor CO:Electrochemical
Power Consumption:<3W
Sensor Installation method:Welding
Alarm Method:Audible/Visual Alarm
Alarm threshold:10%LEL
Alarm volume:≥70dB
Working Environment:Temperature -10℃-55℃;Humidty 95%RH;Atmopheric presue 8o kPa-106 kPa For indoor use
Warm-up time:180s
Dimensions:119x88x30mm
Response Time:CH4≤30s CO≤60s

TAG:  BH-H10domestic gas alarmgas alarm for homemethane gas alarm
Inquiry

If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.

    *

    *

    *